Undoing An Edit - Akai DR16 pro Operator's Manual

Undoing an Edit

Before looking at each edit function, you need to know how to undo an edit. This will be useful
when edits do not turn out as planned. It also gives you the freedom to experiment with edits —
using the undo function to "compare" a newly edited version with the original.
The following diagram shows how the edit undo function works:
Undoing an edit is much like undoing a recording. See "Recording Undo" on page 44.
After each edit, the DR16pro will play the modified material.
1) To undo an edit, press the UNDO key.
The indicator in the key will light up. While this indicator is lit, the DR16pro will play the mate-
rial as it was before the edit.
2) To switch back to the edited material, press the UNDO key again.
Before performing another edit, you must decide whether you want to keep the edit or not.
Once another edit is made, the undo function will apply to the new edit.
Once you have decided, leave the undo function set as required.
Undo OFF
Undo ON
Edit
Original
"in" point "out" point
Edit
TIME
Page 85
Next edit
Undo OFF
Undo ON
Edit2
Original2
"in" point "out" point
11: Editing