Delete - Akai DR16 pro Operator's Manual

4) Use the TRACK REC(INPUT SELECT) keys (and the 9-16 key, if necessary) to select the
tracks you want to erase.
5) Press the STORE/ENT key to erase the tracks.
When the DR16pro has completed the erase operation, the message "D O N E" will momen-
tarily appear on the display. The LED beside the EDIT key will switch off and the previous
mode restored.

Delete

The delete function works basically the same as the erase function. However, the delete function
also moves any subsequent material back. The following diagram illustrates the delete procedure:
Delete Track
"in" point
After delete
1) Set the "in" and "out" points to define the section to be deleted.
See "Specifying the "in" Point and "out" Point" on page 26.
2) Press the EDIT key to enter Edit Mode.
The EDIT indicator will light up
3) Use the JOG/SHUTTLE control to select the Delete function.
You will see a display similar to the following:
4) Use the TRACK REC (INPUT SELECT) keys (and the 9-16 key, if necessary) to select the
tracks you want to delete.
5) Press the STORE/ENT key to delete the tracks.
When the DR16pro has completed the delete operation, the message "D O N E" will momen-
tarily appear on the display. The LED beside the EDIT key will switch off and the previous
mode will be restored.
Note: When the delete function has completed, the "out" point will be set to the same
location as the "in" point. This will prevent you from unintentionally removing another sec-
tion of material.
Section
"out" point
TIME
ABS
EDIT
Page 93
11: Editing