Akai DR16 pro Operator's Manual page 121

13: Backup and Restore
Backup to multiple tapes
If a single tape cannot accommodate the entire backup data, it is possible to back it up across
several tapes.
9) When the tape becomes full during backup, the backup operation is temporarily stopped
and the message "TA PE F U L L" will appear in the display.
10) Replace the tape in the SCSI Tape Drive with a new formatted tape.
11) Press the STORE/ENT key to resume backup.
When the backup is completed, the message "D O N E " will appear in the display momentarily,
then it resumes the normal mode operation.
Press the ESCAPE key to abort backup.
NOTE: When backing up to multiple tapes, it is recommended that you number the tapes
carefully in sequence for the purpose of proper restoring later.
Page 112