Download Print this page
Akai DR16 Operator's Manual
Akai DR16 Operator's Manual

Akai DR16 Operator's Manual

Version v2.0 addendum
Hide thumbs Also See for DR16:

Advertisement

Quick Links

Version V2.0 addendum
Operator's Manual
WARNING
To prevent fire or shock hazard, do not
expose this appliance to rain or moisture.

Advertisement

loading

Summary of Contents for Akai DR16

  • Page 1 Version V2.0 addendum Operator’s Manual WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
  • Page 2 DR16 V2.0 Addendum Backup to SCSI Tape Drive The DR16 is now able to make backups to SCSI Tape Drives (SCSI-DAT, etc.) in addition to the audio DAT backup and backup to ADAT. Connect the SCSI connector of the SCSI Tape Drive to the SCSI-A connector of the DR16 using an appropriate SCSI cable (bearing in mind all the precautions and considerations regarding SCSI termination, SCSI ID numbers and the total SCSI cable length).
  • Page 3 DR16 V2.0 Addendum Select “0” to backup the internal hard disk. Select the type of backup mode ( ) with the JOG/SHUTTLE control then press the STORE/ENT key..to backup the entire contents of disk . . . to backup by the project...
  • Page 4 DR16 V2.0 Addendum Backup of multiple disks The DR16 may use audio data spread over several disks for a single project. When such a project is backed up, the DR16 will automatically access the appropriate disks that contain the necessary audio data.
  • Page 5 The AKAI DD1500 system allows you to store several backups on a single tape, while the DR16 can store only one backup. Further, the title of the backup made on the DR16 is always fixed as “Backup”. This cannot be changed by the user.
  • Page 6 DR16 V2.0 Addendum Messages during Backup and Restore The file count or the following messages will be displayed whilst the DR16 is backing up or restoring data to or from the SCSI Tape Drive: Preparing to access the SCSI Tape Drive...