Akai DR16 pro Operator's Manual page 131

14: Synchronization
6) Use the JOG/SHUTTLE control to select the status of the sync mode.
Select from the following available options:
•
MIDI-MTC:
•
MIDI-SPP:
•
MIDI-MMC:
The default is OFF for MIDI-MTC and MIDI-SPP; the default is SLAVE for MIDI-MMC. If you
select the default, the DR16pro returns to the previous mode.
7) Press the STORE/ENT key to store your choice.
8) If you selected "M I D I- M T C", use the JOG/SHUTTLE control to select the timecode
type.
24 frames/sec
25 frames/sec
30 frames/sec
30 drop frames/sec
29.97 frames/sec
29.97 drop frames/sec
9) Press the STORE/ENT key.
The DR16pro will store the selected synchronization mode and status.
MIDI Timecode Synchronization
1) Press the SYNC key to turn on the synchronization function.
The green LED beside the key will light.
2) Press the Play
During playback or recording, the DR16pro will output a MIDI timecode signal corresponding
to the selected SMPTE/EBU timecode type from the MIDI OUT terminal of the IB-803M MIDI
interface board.
MIDI Clock Synchronization
1) Press the SYNC key to turn on the synchronization function.
The green LED beside the key will light.
2) Press the Play
During playback or recording, the DR16pro will output a MIDI clock signal corresponding to
the programmed Tempo Map (see "Creating a Tempo Map" on page 132) from the MIDI OUT
terminal of the IB-803M MIDI interface board.
OFF, MASTER
OFF, MASTER
OFF, SLAVE
Timecode Type
key or the Play
key or the Play
Page 122
Display
SMPTE 24 F
EBU 25 F
SMPTE 30 F
SMPTE 3 0D
SMPTE 29 .97
SMPTE 29 .97 D
and REC keys simultaneously.
and REC keys simultaneously.