Starting & Stopping Recording - Akai DR16 pro Operator's Manual

Starting & Stopping Recording
Arming Tracks
To arm tracks ready for recording:
1) Press the respective TRACK REC keys.
The TRACK REC keys of armed tracks will flash.
Recording
To start recording:
1) Press the Play
The REC key and the TRACK REC keys of any armed tracks will light up, indicating that
recording is in progress.
2) Press the Stop
Note: The DR16pro stores the recording start point ("in" point) and stop point ("out"
point). You can subsequently access these two points with the IN and OUT keys. These
points are updated each time you make a recording.
Available Recording Time Display
To check the available recording time:
1) Press the SUB-MENU key.
The indicator in the key will flash and the text "SUB-MENU" will appear on the display.
2) Press the 1(DISK) key – numeric keypad.
The message "TIME" will appear on the display.
3) Press the STORE/ENT key to select this option.
The amount of free disk space will be displayed in hours and minutes:
4) Rotate the JOG/SHUTTLE control to view the total disk space.
The total time capacity of the available disks will be displayed.
Note: The value shown will change depending on the selected sampling frequency. See
"Selecting the Sampling Frequency" on page 31.
TRACK REC/INPUT SELECT
METER 1/9 2/10 3/11
key and REC key simultaneously.
key to stop recording.
ABS
S-M
Page 38
4/12 5/13 6/14 7/15 8/16
4: Recording