Akai DR16 pro Operator's Manual page 20

0
ABS
REL
6
S-M SONG
EDIT MIX
14
BUSY
50 –dB
RESET
8/16
TO
COPY
MOVE
8/16
ZERO
FROM
RETURN
17) Numeric keypad - 1(DISK), 2(DIGI), 3(SET UP), 4(UTILITY), 5, 6, 7, 8, 9
These keys are used to store and recall direct locate points, enter time values, and set param-
eter values.
You can perform a variety of operations on the hard disk with the 1(DISK) sub-menu func-
tions.
Set the sampling frequency and other related functions with the 2(DIGI) sub-menu functions.
Adjust the display brightness, drop the sub-frame notation, and assign MIDI controller num-
bers with the 3(SET UP) sub-menu functions. See "System Set up" on page 134.
The 4(UTILITY) sub-menu functions are used for loading, saving or creating projects.
18) :/STACK key
This key is used to enter and recall the 100 stack locate points (00-99). It is also used as a
shortcut during locate data entry. See "Stack Locate Points" on page 79.
19) PREROLL(TIME) key
This key is used to switch on the preroll function. Preroll allows you to locate to a point a few
seconds before a specified point, for example, to provide a count-in to an overdub. See "Preroll"
on page 81.
The preroll value is set using the PREROLL(TIME) sub menu function.
20) LAST 0/– key
This key is used to locate to the last two points at which the stop key was pressed. Press the
key once to locate to the last point at which the stop key was pressed. Press again to locate to
the previous point. See "Last Memory" on page 80.
This key is also used for entering time and parameter values, and entering negative values.
HARD DISK RECORDER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ABS/REL LOCATE
OFFSET
OVER FROM
TO
TIME TIME
Page 11
JOG SHUTTLE
UNDO
7 8
IN ->
4 5
OUT
<<MEMO>>
UTILITY
REC
1 2
DISK DIGI
17
1: Front and Rear Panels
FINE JOG ON
ESCAPE
STORE/ENT
LAST
9
0/-
6
PREROLL
TIME
3
:/STACK
SET UP
18 19 20