Akai DR16 pro Operator's Manual page 84

The following diagram illustrates the commit procedure:
Deleting a Take
1) Press the DISCARD key.
The red LED beside the DISCARD key flashes and the green LEDs beside the TAKE keys
with data flash.
The message "DISCARD" will appear on the display.
2) Press the TAKE key that you want to delete.
The LED beside the selected key continues to flash. (The LEDs beside the remaining keys
turn off.) The LED beside the DISCARD key continues to flash.
The message "S U R E ? ? " will appear on the display.
3) Press the STORE/ENT key to confirm.
The selected TAKE key is cleared.
The following diagram illustrates the discard procedure:
Take1
Original
COMMIT
Take2 Original
Take1
Original
DISCARD
Original
Page 75
8 Take Functions