Akai DR16 pro Operator's Manual page 60

The OVER key
This function uses the TO and FROM times that were set in the two functions described previously.
See "Setting the TO time" on page 49 and "Setting the FROM time" on page 50.
Operation
1) Press the OVER key.
Playback will start the specified TO(TIME) number of seconds before the current position,
continue past current position for the specified FROM(TIME) number of seconds, and then
stop and return to the current position.
The following diagram shows how the play OVER function works:
Playback start
The IN->OUT key
1) Set the "in" and "out" points.
See "Specifying the "in" Point and "out" Point" on page 26.
Operation
1) Press the IN->OUT key.
Playback will start the marked "in" point, continue to the marked "out" point, and then stop and
return to the current position.
The following diagram shows how the play IN->OUT function works:
Current position
Current position
Playback
TO(TIME) seconds
"in" point
Page 51
Playback end
FROM(TIME) seconds
"out" point
Playback
5: Playback