Slip Track - Akai DR16 pro Operator's Manual

Slip Track

The slip track function moves all audio on the current track forward or backward so that the audio
at the marked "in" point is moved to the current position. The following diagram illustrates the slip
track function:
Original Track
Current point after "in" point
Current point before "in" point
1) Set an "in" point on the track you want to slip.
See "Specifying the "in" Point and "out" Point" on page 26.
2) Locate to the position to which you want to move the "in" point.
Refer to the "Locate Functions" on page 77.
3) Press the EDIT key to enter Edit Mode.
The EDIT indicator will light up
4) Use the JOG/SHUTTLE control to select the Slip Track function.
You will see a display similar to the following:
5) Use the TRACK REC (INPUT SELECT) keys (and the 9-16 key, if necessary) to select the
track you want to slip.
6) Press the STORE/ENT key to slip the track.
When the DR16pro has completed the slip operation, the message "D O N E" will momentarily
appear on the display. The LED beside the EDIT key will switch off and the previous mode will
be restored.
"in" point
Current point
TIME
ABS
EDIT
Page 95
Current point
11: Editing