Loading Project Files - Akai DR16 pro Operator's Manual

6: Projects

Loading Project Files

You can load existing project files from any connected hard disk.
To load a project file:
1) Press the SUB-MENU key.
The indicator in the key will flash and the text " SU B-ME N U " will appear on the display.
2) Press the 4 (UTILITY) key – numeric keypad.
The message "LO A D P R OJ" will appear on the display.
3) Press the STORE/ENT key.
The message "S C S I I D 0" will appear on the display.
4) Rotate the JOG/SHUTTLE control to select the SCSI ID number of the hard disk that
contains the project you want to load.
The SCSI ID numbers range from 0 to 6. The internal hard disk uses SCSI ID 0. External hard
disks can be assigned SCSI ID numbers 1 through 6. See "SCSI IDs" on page 98.
5) Press the STORE/ENT key.
The name of a project located on the specified disk, such as, "D R 16 D ATA1 " will appear
on the display.
6) Rotate the JOG/SHUTTLE control to select the project you want to load.
7) Press the STORE/ENT key.
The message "D O N E " appears momentarily on the display.
The DR16pro loads the project.
Page 55