Akai DR16 pro Operator's Manual page 40

4: Recording
Selecting the Sampling Frequency
1) Press the SUB-MENU key.
The indicator in the key will flash and the text "SUB-MENU" will appear on the display.
2) Press the 2(DIGI) key – numeric keypad.
The message "DIGI OUT" will appear on the display.
3) Use the JOG/SHUTTLE control to select the sampling rate option.
The SHUTTLE control steps through the options one at a time. The message "SMPL RATE"
will appear on the display.
4) Press the STORE/ENT key to select this option.
5) Use the JOG/SHUTTLE control to select a sampling frequency.
The following sampling frequencies are available:
6) Press the STORE/ENT key.
The new sampling frequency will be selected.
Warning: You cannot use a mixture of sampling frequencies for a single project. If you
attempt to combine different sampling frequencies, material recorded at one rate will
playback at the wrong pitch at another rate.
Sampling Frequency
48.0 kHz
44.1 kHz
32.0 kHz
44.056 kHz
96 kHz
Page 31
Display
F S 4 8 K H Z
F S 4 4 - 1 K H Z
F S 3 2 K H Z
F S 4 4 - 0 5 6 K
F S 9 6 K H Z