Sip Accounts - Draytek Vigor2710 Series User Manual

Note: A Line port on the router allows connection to a PSTN line so the user can select
either the PSTN or VoIP for the calls, and can access the PSTN line during power
black-outs when VoIP is cut off (only available on port 2).
4 . 1 1 . 2 S I P A c c o u n t s
4 . 1 1 . 2 S I P A c c o u n t s
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an Account Name or user name, SIP Registrar, Proxy, and
Domain name. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to
the destination using AccountName@Domain/Realm as identity.
SIP Accounts Web Page for Vigor2710 Vn -------
236
Vigor2710 Series User's Guide