Virtual Wan - Draytek Vigor2710 Series User Manual

Note: The words in green mean that the WAN connection of that interface (WAN1) is
ready for accessing Internet; the words in red mean that the WAN connection of that
interface (WAN1) is not ready for accessing Internet.
2 . 6 . 2 V i r t u a l W
2 . 6 . 2 V i r t u a l W
Such page displays the virtual WAN connection information.
Virtual WAN are used by TR-069 management, VoIP service and so on.
The Application field will list the purpose of such WAN connection.
Detailed explanation is shown below:
Item
WAN Status
Vigor2710 Series User's Guide
A N
A N
Description
Enable – Yes in red means such interface is available but
not enabled. Yes in green means such interface is enabled.
Line – Display the physical connection (Ethernet, or USB)
of this interface.
Name – Display the name of the router.
Mode - Display the type of WAN connection (e.g., PPPoE).
Up Time - Display the total uptime of the interface.
IP - Displays the IP address of the WAN interface.
GW IP - Display the IP address of the default gateway.
TX Packets - Display the total transmitted packets at the
WAN interface.
TX Rate - Display the speed of transmitted octets at the
WAN interface.
RX Packets - Display the total number of received packets
at the WAN interface.
RX Rate - Display the speed of received octets at the WAN
interface.
32