Draytek Vigor2710 Series User Manual page 110

Available settings are explained as follows:
Item
WAN for Router-borne
Application
Enable/Disable
DSL Modem Settings
WAN Connection
Detection
ISP Access Setup
Vigor2710 Series User's Guide
Description
Choose the router service for channel 3, 4 or 5.
Management - It can be specified for general management
(Web configuration/telnet/TR069). If you choose
Management, the configuration for this PVC will be effective
for Web configuration/telnet/TR069.
VoIP - It can be specified for VoIP only. If you choose VoIP,
the configuration for this PVC will be effective for VoIP data
transmitting and receiving.
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
QoS Type -Select a proper QoS type for the channel.
Protocol - Select a proper protocol for this channel. There
are three options, PPPoE, PPPoA and MPoA for you to
select. The following settings will be changed according to
the protocol selected here.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
PVC Binding – Use the drop down list to specify one PVC
to be bound with other channel.
Add Tag – Check the box to enable the function. Type the
tag number in this field for this channel.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP. If you want to connect to Internet all the time, you can
check Always On.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
100