Draytek Vigor2710 Series User Manual page 17

Interface Description
Line Connector of analog phone for PSTN life line.
Phone2/Phone1
Connecter of analog phone for VoIP communication
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR Connecter for a power adapter.
Power Switch.
ON/OFF
.
7
Vigor2710 Series User's Guide