Draytek Vigor2710 Series User Manual page 148

Source/Destination IP
Service Type
Vigor2710 Series User's Guide
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address
as the Address Type and type them in this dialog. In addition,
if you want to use the IP range from defined groups or
objects, please choose Group and Objects as the Address
Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to choose
the object that you want.
Click Edit to access into the following dialog to choose a
suitable service type.
To set the service type manually, please choose User defined
as the Service Type and type them in this dialog. In addition,
138