Draytek Vigor2710 Series User Manual page 137

Each item is explained as follows:
Item
Enable Open Ports
Comment
WAN IP
Local Computer
Protocol
Start Port
End Port
After finishing all the settings here, please click OK to save the configuration.
Description
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN IP address that will be used for this entry.
This setting is available when WAN IP Alias is configured.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of the
local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or
----- (none) for selection.
Specify the starting port number of the service offered by the
local host.
Specify the ending port number of the service offered by the
local host.
127
Vigor2710 Series User's Guide