Draytek Vigor2710 Series User Manual page 189

Item
Session Limit
Limitation List
Specific Limitation
Administration Message
Time Schedule
After finishing all the settings here, please click OK to save the configuration.
Description
Enable - Click this button to activate the function of limit
session.
Disable - Click this button to close the function of limit
session.
Default Max Session - Defines the default session number
used for each computer in LAN.
Displays a list of specific limitations that you set on this web
page.
Start IP- Defines the start IP address for limit session.
End IP - Defines the end IP address for limit session.
Maximum Sessions - Defines the available session number
for each host in the specific range of IP addresses. If you do
not set the session number in this field, the system will use
the default session limit for the specific limitation you set for
each index.
Add - Adds the specific session limitation onto the list above.
Edit - Allows you to edit the settings for the selected
limitation.
Delete - Remove the selected settings existing on the
limitation list.
Type the words which will be displayed when reaches the
maximum number of Internet sessions permitted.
Click Default Message to display the default message on the
screen.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and
you can use the number that you have set in that web page.
179
Vigor2710 Series User's Guide