Draytek Vigor2710 Series User Manual page 99

Usually ISP dynamically assigns IP address to you each time
IP Address From ISP
you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP
address and check the Enable box. Then click OK to exit the
dialog.
Fixed IP – Click Yes to use this function and type in a fixed
IP address in the box of Fixed IP Address.
– You can use Default MAC
Default MAC Address
Address or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Applications – Schedule web page and you
can use the number that you have set in that web page.
After finishing all the settings here, please click OK to activate them.
89
Vigor2710 Series User's Guide