Draytek Vigor2710 Series User Manual page 102

PPP Client Mode - Click Enable to activate this mode for
WAN2.
SIM PIN code - Type PIN code of the SIM card that will be
used to access Internet.
Modem Initial String - Such value is used to initialize USB
modem. Please use the default value. If you have any
question, please contact to your ISP.
APN Name – APN (Access Point Name) is provided by your
ISP for identifying different access points. Simply click
Apply to apply such name. Finally, you have to click OK to
save the setting.
Apply – Activate the function of identification.
Modem Initial String2 - The initial string 1 is shared with
APN. In some cases, users may need another initial AT
command to restrict 3G band or do any special settings.
Modem Dial String - Such value is used to dial through
USB mode. Please use the default value. If you have any
question, please contact to your ISP.
PPP Username - Type the PPP username (optional).
PPP Password - Type the PPP password (optional).
Index (1-15) - Set the PCs on LAN to work at certain time
interval only. You may choose up to 4 schedules out of the
15 schedules pre-defined in Applications >> Schedule setup.
The default setting of this filed is blank and the function will
always work.
WAN Connection Detection - Such function allows you to
verify whether network connection is alive or not through
ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
92
Vigor2710 Series User's Guide