Draytek Vigor2710 Series User Manual page 19

Interface Description
Line Connector for PSTN life line.
Phone
Connector of analog phone for VoIP communication
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR Connector for a power adapter.
Power Switch.
ON/OFF
Interface Description
Press the button once to enable (WLAN LED on) or
WLAN
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet through ADSL2/2+.
LAN (1-4) Connectors for local networked devices.
USB Connector for USB storage (Pen Driver/Mobile HD) or
printer.
9
.
Vigor2710 Series User's Guide