Draytek Vigor2710 Series User Manual page 98

to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
Default – Click this button to reset to factory setting.
Enter your allocated username, password and authentication
ISP Access Setup
parameters according to the information provided by your
ISP. If you want to connect to Internet all the time, you can
check Always On.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
Idle Timeout – Set the timeout for breaking down the
Internet after passing through the time without any action.
This setting is active only when the Active on demand
option for Active Mode is selected in WAN>> General
Setup page.
88
Vigor2710 Series User's Guide