Item
After finishing all the settings here, please click OK to save the configuration.
4
.
9
.
6
L
A
N
t
o
L
A
N
4
.
9
.
6
L
A
N
t
o
L
A
N
Here you can manage LAN-to-LAN connections by maintaining a table of connection
profiles. You may set parameters including specified connection direction (dial-in or
dial-out), connection peer ID, connection type (VPN connection - including PPTP, IPSec
Tunnel, and L2TP by itself or over IPSec) and corresponding security methods, etc.
The router supports 2 VPN tunnels and provides up to 32 profiles simultaneously. The
following figure shows the summary table.
Each item is explained as follows:
Item
View
Set to Factory Default
Name
Active
Description
Local ID (optional)- Specify a local ID to be used for
Dial-in setting in the LAN-to-LAN Profile setup. This item is
optional and can be used only in IKE aggressive mode.
Description
All – Click it to display the LAN to LAN profiles.
Trunk – Click it to display the Trunk profiles.
Click to clear all indexes.
Indicate the name of the LAN-to-LAN profile. The
symbol ??? represents that the profile is empty.
Check the box to enable the selected profile.
211
Vigor2710 Series User's Guide