Water Supply Inlet - Hitachi BD-W3300 Instruction Manual

Water supply inlet

In case that the water supply is not smooth
Turn off the tapcock and remove the water supply hose.
Follow the procedures below in order to prevent waster from splashing a lot.
Turn off the tapcock and press
Press button to select the [TUB CLEAN] program.
Press button to start
After operation for about 10 sec, press
then button.
Unscrew and remove the jointing nut.
Use a tooth brush to clean off any dirt accumulated on the screen.
In case of any heavy dirt, remove the screen with a pair of pliers and clean it.
Fix the screen to the original position after cleaning it. If it is not fixed back, failure of the water
inlet valve may be caused.
Replace the removed water inlet hose back as it was originally
(Installation Manual)
If you do not attach this, it will cause leaks.
button to turn on the power.
button and
Turn off
Nut
Water inlet filter
Water inlet filter
77