Setting The Delay Start; How To Change The Delay Time - Hitachi BD-W3300 Instruction Manual

Setting the DELAY START

The scheduled time is the time when the operation will finish.
For example, if you want the washing to finish in three hours from now, you should set the scheduled time to 3 Hours.
to change the setting.
(Display after 3 hours)
The [BLANKET] and [DELICATE] programs for WASH, DRY and CLEAN operation can't be delayed.
To confirm the delay
To cancel the delay
To change the delay
Adding the laundry
The finish time may vary with the quantity and material of laundry, the amount of water feeding, water temperature, air temperature and water
draining condition.
Do not wash together with any laundry liable to fade the color for the delayed operation.
In case of power failure or power off, the delayed operation will be cancelled.
Please dry the laundry immediately after the washing finished to avoid wrinkle.
You cannot pause the machine from when there is water going into the detergent tray until delay starts.
After the operation is complete, immediately remove the washing from the machine.
If you leave the washing in the machine after the operation is complete it may give rise to smells.
If operating on the Washing-Drying setting, it is recommended to set the Soft Guard to be on.
Do not add a lot of washing while a program is delayed.
Adding in to much washing at this time will result in stains not being well removed and drying being uneven.
If there is a large amount of washing, the machine may start after you press the Start button without a delay.
58
How to change the delay time (content at time)
WASH
Setting to 3-12 HR later
Setting to 5-12 HR later
: Press button. (With the button pressed, the delay content will be indicated.)
: Press to turn off the power.
: Press button to turn off the power and operate it again from the start.
: Put washing in without turning off the power.
WASH-DRY
For the [WASH] operation
For the [WASH DRY] operation
In such cases
Factory setting.