In Case Of Abnormal Situation Regarding The Fi Nished Washing Load - Hitachi BD-W3300 Instruction Manual

In case of abnormal situation regarding the finished washing load
Symptoms
Have you put in too much detergent?
Some detergent brands may not dissolve if the water
temperature is low.
Did you put the detergent in the tumbling drum directly?
If the detergent is directly put in the tumbling drum, detergent
solution may remain.
Do not put hardened detergent in the detergent case.
Remained detergent
Is the detergent case wet?
Did you use washing powder (natural fat) ?
If the detergent still remains
Has the lint accumulated in the lint filter?
Are you cleaning the tumbling drum regularly?
Solid dirt may accumulate in the inner side of the tumbling
drum.
About lint
Too much of lint on the dark colored washing load.
Lint may be significant if dark colored washing load is washed
after drying the washing load containing towels etc., from
which the lint can easily come off.
Please check the following items Adjustment method
Use appropriate amount of detergent according to the control
panel display.
Be sure to put the detergent in the detergent case.
In case the detergent becomes hard due to moisture, fully smash
it before putting in.
Wipe it completely and then put in detergent.
Do not use washing powder (natural fat).
It may block the piping of the machine and case malfunction or
water leakage.
Increase the number of rinsing times, or operate with [WATER
INJECTION RINSE] if you worry about it.
Maintenance of the lint filter.
Clean it according to "the [TUB CLEAN]" program.
Increase the number of rinsing times or operate with [WATER
INJECTION RINSING].
In order to remove the lint adhering to the laundry, please select
the FUZZY program for DRY (for 30 MIN.)
It is recommended to wash after cleaning the tumbling drum by
running the Basket Wash program.
95