Preface (Features) - Hitachi BD-W3300 Instruction Manual

Preface (Features)

Wind Iron
High speed air flow stretches out wrinkles. Clothes are dried at lower temperatures than with
existing products, resulting in less shrinking of delicate clothes.
Clothes inside the big drum move around a lot and are dried.
A jet fan motor generates a high-speed airflow, which blows over clothes and stretches
wrinkles out.
Cleaning Power
Sensor big drum washing
The 3D acceleration sensor will maximize the
beat-washing effect by controlling the
frequency of rotation of the drum with the
rotation frequency sensor.
(When choosing [FUZZY] [SPEEDY WASH &
DRY] [SPEEDY] [HEAVY] [FAVORITE] [SOFT]
settings)
Energy Saving
Heat recycling drying
1
Main motor
4
Below are the illustrations on the features of the tumbling drum washing
& drying machine and the key points for washing, and drying. Please read
and follow these instructions carefully when using this machine.
Heavy washing loads
Jeans, trainers,
and others
The washing cannot be lifted up
Light loads
Shirts and aprons
The washing goes too far on the other side
1 Recycling the heat from the main motor
The heat generated from the main motor will be transferred
3
into the drum to increase the temperature.
Eco Vent
2 Also recycling the heat from the jet fan
2
Jet Fan
In addition to the heat from the heater, compressed heat
from the jet fan, which generates a high-speed airflow, and
the heat from the jet fan motor are used for warm at the
time of drying.
3 Also recycling the heat from the air through the Eco Vent
The hot air warmed up by the main motor and the heater
are taken to the Eco Vent (open-close type inlet), which is
set along the drying pathway, and reused as warm air at
the time of drying.
(This function is not used by the [SILENT], [10 MIN DRY],
and [DEODORANT] settings)
High speed air flow
Increasing the drum
rotation frequency
Increasing the beat washing effect
Decreasing the drum
rotation frequency
Increasing the beat washing effect