Other Situations; To Remove The Water When Moving A House Etc. · If It Is Frozen - Hitachi BD-W3300 Instruction Manual

Other situations

Close the water tap.
Turn on the power, press
program, and start the machine by pressing
Operate the machine for around 10 seconds, and
turn off the power supply by pressing
Remove the water remaining inside the water supply hose.
Keep the water inlet hose opening downwards
after its removal.
The water adhered to the water inlet hose will drip, please put
buckets or other containers at the front of the water inlet hose.
Remove the water inlet hose and dip into the hot
water at about 40˚C
Pour 5L of hot water at about 40˚C into the drum
and hold about 10 minutes
Connected to the inlet hose and then turn on the
water tap.
Open
100
To remove the water when moving a house etc.
, select [TUB CLEAN]
(Installation Manual)
If the machine freezes
Inset the drain hose into the drain outlet.
Turn on the power, press the [SPIN] button and run
for 30 seconds by pressing
.
Drain the water from the drum and the drain hose with the drain
.
valve open.
Press
When worrying about freezing in cold regions, please cover the behind (top) of the
machine with blanket for holding temperature.
Turn on the power, press the [START] button, and
leave the machine as it is
(Unfreeze the water inlet valve)
Electric heating may unfreeze the water inlet valve and intake
water. (About 20 minutes)
Confirm the following 2 points
(1) Whether the drum can be turned manually?
(2) Connect to the power supply, select merely [SPIN] and start to run.
Whether to drain
When no confirmation is feasible, please repeat the operation of
~
.
and turn off the power supply.
Blanket, etc.
Confirm the rotating condition
Confirm drainage
.
~ .