To Cancel And Set The Unwinding Spinning; To Set Or Cancel The Softening Protection - Hitachi BD-W3300 Instruction Manual

Fully automatic washing & drying machine
Hide thumbs Also See for BD-W3300:
Table of Contents

Advertisement

After the final spinning in the [WASH] operation finishes, perform the unwinding operation (for 2~ 4 min.) so that the laundry can
be taken out easily (except for the programs of [SOFT], [BLANKET] and [DELICATE]). During the unwinding spinning, the time left
indicator blinks.
Press
to turn on the power
Press & hold
for at least 3 sec.
Press
to turn the power off.
The setting is saved.
Carry out the same procedure when changing the settings.
If the washing load is heavy (6kg or over), the untangling action may not be carried out.
If starting the operation from rinsing or spin-drying, the untangling operation will not be carried out.
After the drying finishes, rotate the tumbling drum before taking out the laundry to keep the soft feeling. In the operation of
softening protection, the door will be locked. Therefore, press the PAUSE button and then open the door.
(Except the programs [BLANKET], [SHELF DRY], [DEODORANT] and [FUZZY (drying for 10 min.)
Softening protection operation
TI M E LEFT
MIN
DELAY
HR LATER
In the process of softening protection operation,
the time left indicator shows [0:00]. The
indicator flashes, and
lights up.
Press
to turn on the power.
Press & hold
for at least 3 sec. (long beeps sound)
Press
to turn the power off.
The setting is saved.
Carry out the same procedure when changing the settings.

To cancel and set the unwinding spinning

The factory default setting is [NO SETTING]. To change the setting

To set or cancel the softening protection

Operate for about 2 hr. with stirring for 12 sec. every 5 min. When the PAUSE button is pressed, the door lock is
released. After the operation finishes.
Operation finish warning
sound (buzzer sound)
The factory default setting is [NO SETTING]. To change the setting
Every time you press this for three seconds or longer, the following switch will occur.
Is set (at default)
Not set
(Untangling spin-drying is not carried out.)
Softening protection operation
Stopping
Tumbling drum rotating
Stopping and tumbling
drum rotating repeatedly.
(About 5 MIN)
(About 12 Sec)
(About 2 Hour)
Every time you press this for three seconds or longer, the following
switch will occur and a sound will be heard.
Time of setting
A long "Peep" sound
Time of removal
A short "Pip" sound
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents