Hitachi BD-W3300 Instruction Manual page 76

Maintenance
Machine body and tumbling drum
Adhered with water drops and dirt
In case of any detergent or softener on the plastic or metal parts of the door, wipe it off with a soft cloth. It may cause damage or breakage.
In case of any dirt on the glass panel at the inner side of the machine door, wipe it off with a wet cloth.
Do not splash water onto any part of the machine directly.
Do not wipe it with benzine, thinner, cleaning powder, basic detergent or wax, rub it with a bristle brush.
In case of any rust on the tumbling drum, clean it off with the cleanser available in the market.
Do not use any metal bristle brush.
Although the tumbling drum and the ring around the door are made of stainless steel and not liable to rust, they may rust in one of the following cases.
Hairpin remain in the tumbling drum for a long time or the water is mixed with iron power or red rust.
Any chloric bleach, detergent or softener is stored in the tumbling drum or contact with the metal part around the door for a long time.
After the operation finishes, water remaining on the path of the added water from the water pouring inlet may drip, so wipe it wish a soft cloth.
The lint adhering to the inner side of the adjacent of machine door, adjacent and inside of the
bellows and inside of the tumbling drum should be removed.
Lint adhered between machine door bellows and the door may lead to water leakage or lint
adhered to the laundry.
Some lint still adhered to the laundry even wiped, please operate [TUB CLEAN] program
(for 3 hours).
(You can wash it even without using washing basket cleaner.)
Due to the circulation, condensation may form on the door or door packing, and if this is a
concern for you, wipe it off.
76
(Continued)
Door Glass panel Door bellows