Operation - Hitachi BD-W3300 Instruction Manual

Fully automatic washing & drying machine
Hide thumbs Also See for BD-W3300:
Table of Contents

Advertisement

Symptoms
Did you change the dehumidification method during drying
operation to Water-Cooling Dehumidification Method?
Dirt does not
accumulate in the dry
In the Water-Cooling Dehumidification Method, since dirt is
filter
discharged together with the water used for water-cooling
dehumidification, very little amount of dirt may accumulate in
the dry filter.
Operation start
sound, finish sound
Are the operation start sound, finish sound and finish warning
and finish warning
sound set to No Sound?
sound does not ring
Volume of the voice
Volume can not be adjusted during operation.
guidance can not be
adjusted.
Volume of the voice guidance can not be adjusted during

operation.

Operation start sound,
finish sound, finish warning
sound and voice guidance
Sound may become inaudible depending on the surrounding
are barely audible
area noise and status of operation.
Odor of the rubber parts etc. may be there for sometime after
purchasing the machine.
Peculiar odor from
the machine
Are you cleaning the tumbling drum regularly?
Accumulation of soap scum or mildew in the drum may cause
odor.
Please check the following items
Adjustment method
It is not an error.
Set the operation start sound and finish sound to melody, sound or
buzzer.
(P.65)
Set the finish warning sound to With Sound.
After the operation finishes, press power ON button, and adjust
the volume after the power supply turns on.
Set the volume to High if the voice guidance is barely audible.
Volume of operation start sound, finish sound and finish warning
sound can not be adjusted.
Odor will slowly disappear as the machine is used.
Periodically perform the [Tub Clean] program.
For suppressing the generation of mildew, it is recommended to
leave the door open after finishing the operation. (Take necessary
precautions so that children do not get into the drum) In this case,
use door stopper (door open screw).
(P.33)
For suppressing the generation of mildew, it is recommended to
run the [Tub Dry] program after drying the drum.
(P.65)
(P.63)
(P.63)
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents