About The Wind Iron; How To Prevent Wrinkle - Hitachi BD-W3300 Instruction Manual

About the Wind Iron

This reduces wrinkles by blowing low-temperature air at a high speed over washing during drying.
Select the [FUZZY], [SPEEDY WASH & DRY], [HEAVY], or [FAVORITE], in Wash Dry operation, or the [FUZZY], [HEAVY] in Drying operation for the Air Ion
function to work automatically.
If washing is half-dried or dried and then finished in [DRY] mode, it is not possible to remove wrinkles from the dried clothes.
Wash Dry operation
(P.40)
Press [WASH DRY] to
the program for the
Wind Iron
(Displayed)
Dry operation
(P.42)
Press Dry to select the
program for the Wind Iron
(Displayed)
If the DRY FILTER gets blocked and the pressure inside the machine increases, Wind Iron may not flash, but just be displayed (low speed warm air
operation).
If the DEODORANT program is selected within the CLEAN program, the Wind Iron light will flash.
Reduce the drying load. However, if the washing load is very small, or if there is a high proportion of cotton items, add another 1-2 items to the wash. (This is
in order to prevent running the drying operation with washing sticking to the inside of the drum.)
Anti-wrinkle clothing is recommended.
Dry thick items and thin items separately.
Dry strings after tying them into a knot. Reduce the amount of clothes that get jumbled up easily, such as shirts and pyjamas. (Do this to prevent washing
from getting jumbled up)
After spin-drying, take the washing out and then run the drying after removing the wrinkles caused by spin-drying.
If the laundry is left aside for a long time after the drying operation finishes, the laundry may lose the softness and get wrinkle. Therefore, immediately take
out the laundry after the operation finishes or set the softening protection.
Wrinkle reduction effects may be low for items that wrinkle easily, such as thin cotton shirts. In the [Fuzzy] program within Wash Dry operation, select
30 Minutes for drying, and hang up on a hanger to dry immediately after the operation stops.
24
Washing process Spin
(Displayed)
High speed airflow operation
High speed
warm air
Low speed
reverse
rotation
(Flashing)
When this is flashing it is possible to
use high speed warm air.

How to prevent wrinkle

High speed airflow
operation
High speed
spin or high
speed
warm air
spin
(Displayed)
When this is flashing it is possible to
use high speed warm air.
High-speed airflow operation
High speed warm air
Low speed reverse
rotation
(Flashing)
High-speed airflow operation
High speed
High speed
warm air
warm air
Low speed
Low speed reverse rotation
reverse
rotation
(Flashing) (Flashing)
(P.74)