Press [Delaystart] Button, And About The Setting Change Function; If You Want The Washing To Be Done Thoroughly At A Low Temperature (Temperature Sensor Control) - Hitachi BD-W3300 Instruction Manual

Press [DELAY START] button, and about the setting change function
for 3 seconds or longer, and the setting details will be displayed on the left of the
How to read the display for each function is given below.
[Examples of Displays]

If you want the washing to be done thoroughly at a low temperature (temperature sensor control)

Detect the room temperature and control the washing time.
If the room temperature is very low, the washing time will be prolonged.
Press to turn on the power
Press & hold
Press
Press
(The setting will be completed when you press the Start button.)
Press to turn the power off.
It works with the [FUZZY] and [HEAVY] programs for WASH and WASH>DRY
(For WASH only etc., it does not work if the setting is changed.)
The temperature sensor control does not work in some cases when washing process runs continuously.
The setting is saved. For resetting, perform the same operation.
Set/cancel temperature sensor control
MIN
Adjust the rotation speed of spinning at the time of Wash Dry mode operation
(drying program)
Adjusting the degree of spin-drying
MIN
Items in brackets are default settings
The factory default setting is [NO SETTING]. To change the setting
for at least 3 sec.
MIN
(1: Standard mode)
MIN
MIN
The display will change each time you press Wash.
NO SETTING (at factory)
(without the temperature sensor control)
SETTING
, , and buttons.
(0: Not set)
67