Hitachi BD-W3300 Instruction Manual page 14

Safety Precautions
Others
Close the zips and fasten the buttons/Failure of the machine or water leakage may be caused during operation.
Place a waterproof stand or a washing machine stand on the floor before installation
This is to prevent the floor from getting dirty and wet due to water leakage.
During times of high humidity, such as in summer, condensation may form on the outside of the product due to using cold water,
and may make the floor wet. In such cases, it is recommended to use the separately-sold waterproof stand (TP-780) or the washing
machine use stand (YT-1).
In case of any softener, liquid detergent or bleach adhering on to the plastic or metal part of the detergent case, wipe it off
with a wet soft cloth.
The machine body may get rusty or damaged and the plastic part may be damaged as well and cause injury.
After stop of the water feeding or when the water supply hose is removed for a period of time and replaced again, turn off
the tapcock and press START button. When the detergent amount is indicated, slowly turn on the tapcock (also for leaving
it unused for a long time).
It causes generation, the damage of the rust of the main body, and the damage of a plastic part, and the person who uses
it might be injured.
Clean the drain outlet.
Blockage of the drain outlet may cause water leakage at the drain outlet.
Regularly clean the lint filter or the drain outlet (once a month).
Washing the laundry liable to generate lint or the laundry adhered with pet fluff or hair may block the lint filter or the drain
outlet, so as to cause poor drainage, and water leakage.
Clean the area surrounding the detergent tray by pulling out the detergent tray (Once a week)
Leaving liquid detergent, softener, or bleach on the product, may result in it breaking or in injury.
Do not use hot water from the water heater.
The machine failure, water leakage or poor drying can be caused.
Do not jam any laundry when closing the door.
The machine failure, water leakage may be caused.
Do not climb up on the machine or place heavy objects on it.
The machine failure, water leakage may be caused.
Never pull the door with force.
The machine failure, water leakage may be caused.
Do not use hot water above 50°C
The machine failure or water leakage or poor drying may be caused.
The washing cap (optional) is not applicable for the operations of [WASH DRY] and [DRY] and the program of [SOFT].
The washing cap may jump out, causing injury or damage to the machine body.
14
(P.100)
°
(Continued)
CAUTION