Spin-Drying/ It Takes Time Until The Spin-Drying Starts - Hitachi BD-W3300 Instruction Manual

Various setting methods
If you want to control the vibration or sound at the time of [WASH DRY]
You can toggle the speed of spin-drying in the drying program of the WASH DRY operating mode.
Vibrations may be large during operation depending on conditions such as the strength of the floor, so please adjust according to your conditions of use.
Press to turn the power on.
Press for 3 or more seconds.
Press
Press
(The setting will be completed when you press the Start button.)
Press to turn the power off.
The setting details will be remembered.
Carry out the same procedure when changing the settings.
The spin-drying speed in the washing program will not change.
If you want to reduce the vibration and sound at the time of spin-drying/ It takes time until the spin-drying starts
Besides the standard mode, you can switch to the modes of operation that control over vibration and noise and make
the spinning start smoothly.
Press to turn the power on.
Press for 3 or more seconds.
Press and change the settings.
Press
(The setting will be completed when you press the Start button.)
Press to turn the power off.
The setting details will be remembered.
Carry out the same procedure when changing the settings.
68
The default setting is High Speed Mode. To change the setting
The default setting is Standard Mode. Press To change the setting
(Continued)
The display will change each time you press Rinse.
High Speed Mode: Default
Mid-speed mode: The operating time will be longer
Low-speed mode: The operating time will be longer
MIN MIN MIN
The display will change each time you press Spin.
Control the vibration noise during the spinning in THE
LOW-VIBRATION MODE. (The operation time will be
prolonged.)
STAND MODE (The factory default setting)
Make the spinning start smoothly in the SMOOTH
MODE. (Louder noise or vibration may be generated
depending on the laundry type.)