How To Use Detergents , Bleaches, And Softeners - Hitachi BD-W3300 Instruction Manual

Preparation and putting method of detergent and softener
Pull out the detergent case.
Do not pull out the cap.
Please pull it out slowly because there may be water
remaining in the detergent case.
Put the detergent in
Enter the amount of detergent as indicated on the
display (guideline.)
(P.26, 27)
28
How to use detergent, bleache, and softener
Liquid detergent/ liquid bleach input section
(inner right side)
Softener input section (at
the front of the right side)
Powder detergent /Powder bleach input
section (left side)
Detergent case
Handle
Cover
Powder and liquid detergent
Do not use powder soap
The pipeline the machine may be blocked, causing failure and water
leakage.
Do not put in excessive amount of detergent.
It may lead to a longer washing time, poor washing and descaling
effect, darkening the tub surface, water leakage, or even electric shock.
Do not put the agglomerated detergent in the detergent case.
Crush it before putting in to avoid water leakage.
In case the detergent case is wet, the detergent may stick on it. Wipe it
dry with a cloth before putting in the detergent.
If no detergent is put before water feeding, the detergent may not be
dissolved completely in the detergent case.
Do not overdose when using liquid detergent and liquid bleach at the
same time, or it will overflow due to the siphon phenomenon.
Liquid detergent and softener inlet siphons off water, as a result of
which water remains in the detergent case. The amount of water
remaining will increase due to internal condensation or due to adhered
softener. If this bothers you, throw the water away, wipe it with a dry
cloth, or leave it alone.
For the detergent in the form of tablets, flakes or cubes, dissolve it fully
before putting in the tumbling drum directly.
After press PAUSE button the detergent amount is indicated, and open
the door to put it in.
(Continued)
(P.75)