Table of Contents
Advertisement
After spraying the concentrated detergent onto the laundry, blow in warm air to activate the detergent and perform washing.
Select the
Dissolves
HOT WASH
detergent
The operation
The circulating pump
time will be
us used to dissolve
prolonged to
the detergent
about 5 min.
If you set Hot High Wash, the operating time will be about 5 minutes long than normal, and the amount of electricity used will be increased.
Even if you press Pause during the Hot High Wash is in operation, the door may not be released straight away. This is in order to cool down the contents of the drum.
If the room temperature is cold (about 8°C or lower), the Hot High Wash operating time may be longer. (About 2 minutes)
°
Do not use the HOT WASH for the following cases.
Start it when there is water.
[BLANKET], [DELICATE], [DRY] and [WASH] programs
When the HOT WASH is set, the settings can't be changed from detection of the washing load to the completion of the HOT WASH operation.
If you press Pause while Hot High Wash is running, even if the door look is released, "Hot" may be displayed.
Using the HOT WASH
Heat
Blow warm air on the
laundry to heat the detergent
so that the enzyme power
can be activated to remove
the stains.
Circulation pump
Flap and wash
Circulating pump
Add water and rotating the
It adds water and washes clothes
tumbling drum, while
circulating concentrated detergent
performing washing.
that is about double the concentration
of normal detergent.
Warm air
Alternates between circulating
warm air and detergent.
65
Hide quick links:
Advertisement
Table of Contents
