Using The Clean Function - Tub Clean / Tub Dry; Selecting The Right Program · About The [Tub Clean] Program · About The [Tub Dry] Program · How To Start - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Using the CLEAN Function – TUB CLEAN / TUB DRY
Desired operation
TUB CLEAN
Cleaning the drum and removing odors
TUB DRY
Preventing mold growth
This program removes odors by washing off any soap or mold that has accumulated inside the
washing drum, and then running a drying operation for 30 minutes.
 [TUB CLEAN] (3 hours) 
 When the odor inside the
drum is a concern
 When the amount of lint on
laundry is a concern
 About once every two
months is recommended
 Use a commercially available washing drum detergent or chlorine-based bleach.
 If the detergent includes instructions on its packaging, follow those instructions.
 If the detergent does not include instructions, use about 200 mL.
 Do not use kitchen bleach, as it has little effect.
 When pouring chlorine-based bleach or washing drum detergent into the drum, be careful to avoid
spilling on the exterior of the machine.
This program dries the drum for 30 minutes to prevent mold growth.
52
Selecting the right program
About the [TUB CLEAN] program
When to use the program
Guide for washing drum detergents
About the [TUB DRY] program
Load
Do not load laundry
 [TUB CLEAN] (11 hours) 
 When the odor inside the
drum is overwhelming
 When you want to clean the
drum thoroughly
 When you want to remove
accumulated soap
Operation time
3 hours
11 hours
30 minutes