Interconnect Board - Tektronix Phaser 340 Service Manual

8
Field Replaceable Unit Disassembly/Assembly

Interconnect board

8-58 Phaser 340 Color Printer
Tools required
Magnetic screwdriver
T-15 TORX tip
1. Turn off the printer and remove the power cord.
2. Remove the top, rear, left-side and right-side covers as explained in
the earlier topic, "Cabinet panels and covers" on page 8-4.
3.
Remove the ink loader as detailed earlier in the topic, "Ink loader" on
page 8-6.
4. Remove the printhead as explained in the earlier topic, "Printhead" on
page 8-37.
5.
Remove the main board as explained in the later topic, "Main board"
on page 8-60.
6. Disconnect the wiring harnesses leading to the interconnect board.
7. Remove the drum maintenance cartridge.
T-10 TORX tip
T-20 TORX tip