Tektronix Phaser 340 Service Manual page 53

Table 2-1 Configuration page settings (cont'd.)
Parameter Description
LocalTalk port Indicates the type of interpreter in use
interpreter at the port.
LocalTalk Indicates the type of printer installed at
printer type the port.
LocalTalk node Indicates the LocalTalk network node
number of the printer.
Serial port Indicates the type of interpreters in use
interpreter at the port.
Serial port Data byte encoding for communication. yes
encoding
Serial port Baud rate.
speed
Serial port Hardware or software flagging.
flagging
Serial port Parity check encoding method
check parity
Serial port data Bits used to encode a data byte.
bits
Serial port stop Number of stop bits.
bits
EtherTalk Port Indicates the type of interpreter in use
interpreter at the port.
EtherTalk Indicates the type of printer installed at
printer type the port.
EtherTalk zone Name assigned by the network
administrator for the zone the printer is
assigned to
EtherTalk The EtherTalk protocol address
network assigned at boot time for routing.
EtherTalk node Indicates the EtherTalk address of a
printer on a network.
NetWare port Indicates the type of interpreters in use
interpreter at the port (Phaser 340 only).
Print server Name of the printer server.
name
Configuration Name of the configuring file server.
file server
Login Password Indicates whether a network password
has been set.
Queue Scan Interval between successive queue
interval scans by the printer.
Installing the Printer and Drivers
Saved Default
in
NVRAM
yes PostScript Level 2 Not installed, Disabled,
yes LaserWriter
no 0
yes PostScript Level 2 Not installed, Disabled,
ASCII
yes 9600
yes XonXoff
yes None
yes 8
yes 1
yes PostScript Level 2 Disabled, <interpreter>
LaserWriter
yes *
yes 0
yes 0
yes Auto Select
yes TEK01B009,
hardware-
dependent
yes null string
yes Not set
yes 15 seconds
Limits or alternate choices
<interpreter>
Any string 32 characters in
length or less
Any integer 0 through 254
<interpreter>
Binary, Raw, TBCP
38400 (printer-dependent),
19200, 9600, 4800, 2400
DTR, DTR low, Etx Ack,
Robust Xon Xoff, Xon Xoff2
Space, Even, Odd, Mark
7
2
Any string of 32 character or
less.
Any string of 32 characters or
less.
Integer 1 through 65535
Integer 1 through 65535
Disabled, <interpreter>
user-defined
user-defined
Set
An integer 1 through 3600 in
seconds
Service Manual
2
2-17