Tektronix Phaser 340 Service Manual page 168

6
Troubleshooting
6-42 Phaser 340 Color Printer
Table 6-7 Macintosh printing problems (cont'd.)
Image prints in
black-and-white.
Image is rotated 90
degrees.
In the print dialog box, make sure the Color/Grayscale option
has been selected.
Make sure that the Phaser 340 icon was selected in the
Chooser. Try printing the job again.
Check the version of your LaserWriter driver to ensure that it
is version 6.0.7 or higher. Earlier versions of the driver do not
support color PostScript.
The application may require special instructions to print.
Check in the Phaser 340 Drivers and Utilities Printing
Reference.
In the application's Page Setup, make sure that the image is
selected to print in portrait or landscape orientation.