Tektronix Phaser 340 Service Manual page 33

Table 1-4 Functional specifications
Characteristic
Printing process
Color medium
Addressability
Engine printing speed
Minimum printing
margins
Maximum print area
Usable paper weights
Specification
Solid ink-jet onto plain paper.
Cyan, magenta, yellow and black ink sticks, each
shape-coded. The printer uses the subtractive color system
to produce the colors red, green, and blue. Only black ink is
used to create the color black.
Selectable 300 x 300 or 600 x 300 dots-per-inch (horizontal
and vertical). Only Phaser 340 Plus configuration can print at
600 x 300 dpi.
The time it takes from loading to ejecting:
300 dots per inch:
on A- or A4-size: ≈15 seconds per print
600 dots per inch:
on A- or A4-size: ≈ 30 seconds per print
Transparency film printing:
on A- or A4-size: ≈ 30 seconds per print
Print times do not include processing time by the image
processor, which varies, due to image complexity.
All sides: 5 mm (0.2 in.) except bottom which is 7 mm (0.7 in.)
A-size: 8.1 x 10.4 in.
2432 x 3134 pixels
A4-size: 200 x 283 mm
2368 x 3342 pixels
Tray fed: 16 - 32 lb Bond (60 - 120 g/m
Manual fed: 16 - 32 lb Bond (60 - 120 g/m
50 - 80 lb Cover (135 - 220 gm
General Information
2
)
2
)
2
)
Service Manual 1-17
1