Tektronix Phaser 340 Service Manual page 151

Table 6-4 Front panel and fault history log error codes and messages (cont'd.)
Error code
22,179.36
22,180.37
22,181.38
22,182.30
22,183.31
22,184.32
22,192.31
22,193.32
22,194.33
22,195.34
22,196.35
22,197.36
22,198.37
22,199.38
22,200.30
22,201.31
22,202.32
22,203.33
22,204.34
22,205.35
22,206.36
22,207.37
22,208.38
22,209.30
22,210.31
22,224.36
24,000 PostScript Errors
24,000.17
24,001.18
24,002.10
24,003.11
24,004.12
24,005.13
Meaning
Jam -- Media at hand-feed, unexpected event paper exit sensor FALSE.
Jam -- Media at hand-feed, unexpected event paper hand-feed sensor
TRUE.
Jam -- Media at hand-feed, unexpected event paper hand-feed sensor
FALSE.
Jam -- Media at hand-feed, unexpected event auxiliary tray not present.
Jam -- Media at hand-feed, unexpected event auxiliary tray A-size.
Jam -- Media at hand-feed, unexpected event auxiliary tray A4-size.
Jam -- Front access door open.
Jam -- Stripper access door open.
Jam -- Unexpected hand-feed interrupted operation.
Jam -- Y-axis motor (drum motor) stall.
Jam -- Media not present at preheat entry sensor for transfer start.
Jam -- Media trailing edge time-out at paper exit sensor.
Jam -- Media too short to fully transfer image.
Jam -- Media too long.
Jam -- Media leading edge time-out at paper exit sensor.
Jam --A-width expected,A4-width seen at preheat entry media stage.
Jam --A4-width expected, A-width seen at preheat entry media stage.
Jam -- Standard tray media leading edge time-out at paper pick sensor.
Jam -- Media leading edge time-out at A/A4 paper width sensors.
Jam -- Media leading edge time-out at preheat entry sensor.
Jam -- Media leading edge time-out at preheat exit sensor.
Jam -- Auxiliary tray media leading edge time-out at paper pick sensor.
Jam -- During hand-feed stage, media leading edge time-out at preheat
entry sensor.
Jam -- A-width sensor TRUE, A4-width sensor FALSE at preheat entry
stage.
Jam -- A-width sensor FALSE, A4-width sensor FALSE at preheat entry
stage.
Jam -- media location and cause unknown.
Engine reports power is off.
Engine reports it is running diagnostics.
Engine is stuck in the VxWorks shell.
Engine is stuck in mechanism initialization.
unused
Engine is in state Ready but isn't permitting commands.
Troubleshooting
Service Manual 6-25
6