Tektronix Phaser 340 Service Manual page 40

2
Installing the Printer and Drivers
2-4 Phaser 340 Color Printer
The printer requires the following environmental conditions:
Temperature: 15 to 35
Humidity: 10 to 80% relative humidity, non-condensing
Power: 115 VAC or 220 VAC. The printer requires about 10 amps of
current at full load in 115 VAC mode; 5 A at 220 VAC mode.
Clearances: A space measuring 46 cm wide by 92 cm deep by 76 cm
high (18 ins. wide by 36 ins. deep by 30 ins. high). The space in front
of the printer accounts for enough clearance to install the paper tray.
The extra height is to install the ink sticks.
Weight support: 45 kgs (100 lbs.)
Driver software must be installed on the host computer to use the printer's
fullest potential. A host computer must meet the following conditions:
Mac
Mac II, Performa, Centris, Quadra or PowerMac
Operating System 6.0.7 or later
4 Mbytes RAM
PC
IBM AT, PS/2 or compatible, with a 386 or later CPU, a 3.5-inch floppy
disk drive, and a hard disk drive, 2 Mbytes RAM, 2 Mbytes of hard
disk space
DOS systems
DOS 3.1 or later
An application that supports color PostScript or HP-GL
Windows systems
Windows 3.1
Windows 95
OS/2
Windows for Workgroups 3.11
Windows NT and Daytona
o o
C (59 to 95 F)