8
Field Replaceable Unit Disassembly/Assembly
8-52
Phaser 340 Color Printer
7.
Rotate the head tilt cam gear to its print position.
8.
Reinstall I/O board 1 and reconnect its wiring harnesses.
Caution
After reinstalling I/O board 1, before turning on the printer,
always make sure that the head tilt cam gear is latched by the head
tilt solenoid and that the head tilt cam gear is disengaged (via its
missing teeth) to the drive gear.
9.
Reinstall the printer covers.
10.
Power-up the printer and make a test print.