Tektronix Phaser 340 Service Manual page 60

2
Installing the Printer and Drivers
2-24 Phaser 340 Color Printer
b. When prompted for a directory name to use for installing the
software, use the default directory name PHSRTOOL or type in a
new name, then click OK.
8.
At the message dialog box, click OK; the Control Panel opens.
9. In the Control Panel, double-click the Printers icon; the Printers
window appears.
10. In the Printers window, double-click Add Printer; the Add Printer
Wizard appears. Click Next.
11.
Select the printer's connection:
Select Local Printer if the printer is connected directly to a host
computer, then click Next.
Select Network Printer if the customer's computer accesses the printer
through a network. Click Browse to search the network and select a
printer queue. Then click Next.
12.
In the window listing Manufacturers/Printers, click Have Disk. The
Install From Disk dialog box appears.
13. Use either the Phaser 340 CD-ROM or the Printer Software for
Windows diskette. Type in the name of the drive that the CD-ROM or
diskette is in, and click OK.
14.
A list of Tektronix printers should appear. Select the printer in the list,
then click Next.
Select Tektronix Phaser 340 if you have the standard configuration of
the printer.
Select Tektronix Phaser 340 1200 dpi if you have the extended options
feature of the printer.
15.
Select the port your printer is connected to, then click Next.
16. It is recommended that you use the default printer name shown under
Printer Name. Click Yes if you want this printer to be the default
printer. Then click Next.
17.
At the prompt, Would you like to print a test page? click Yes
to verify the printer's connection. Then click Finish.
A status bar appears while files are copied to your computer.
18. If prompted, select the path for the PostScript driver file
ICONLIB.DLL; this should be in your WINDOWS/SYSTEM directory.
If the file isn't installed on the hard disk, insert the Microsoft CD-ROM
for Windows 95, select the WIN95 directory, and click OK. Or, insert
the requested floppy diskette for Windows 95 and click OK. The
software you need is installed.