Tektronix Phaser 340 Service Manual page 39

Will the application(s) and sample files be available at the time of the
installation to send test files to the printer? _______________________
Will a SCSI font disk be installed on the printer? __________________
For installations using the printer's built-in Ethernet interface, you
should inform the network administrator of the printer's
preconfigured Ethernet address; it is printed on the configuration
page.
Does the customer have the appropriate power outlet available? The
printer's AC power input is set for these voltages:
115 VAC (87 to 128 VAC)
220 VAC (174 to 264 VAC)
If necessary, refer to the later topic, "Selecting the AC input voltage."
Did the customer order the correct power cord?
_______ U.S. Standard (161-0230-01)
_______ European Option A1 (161-0104-06)
_______ United Kingdom Option A2 (161-0066-10)
_______ Australian Option A3 (161-0104-05)
_______ Swiss Option A5 (161-0154-00)
Customers must provide the particular interface cable or network
adapter they need to use with the printer. Customers can purchase the
following from the Tektronix Graphics Supplies Order Desk by calling
1-800-835-6100.
Parallel cable, DB25-pin plug to Centronics 1284C 012-1468-00
Serial, 9-pin to 9-pin, 3 m (10 ft.), null modem
Serial, 9-pin to 25-pin, 3 m (10 ft.), null modem
For AppleTalk installations, customers must provide the appropriate
network adapter to the printer's 9-pin circular LocalTalk connector.
Customers can obtain an adapter from their dealer. For Ethernet
networks, customers must provide the appropriate network cables to
connect to the printer's ThinNet or Twisted Pair connector.
Installing the Printer and Drivers
012-1379-00
012-1380-00
Service Manual
2
2-3