Map Toolbox; Enter/Delete Stopover; Tmc On Your Route - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE

Map Toolbox

> EN
You can set preferences for navigation, the
map display style, and the route in the
Map Toolbox.
> Press rotary control/push button in the
map display.
During active navigation, the following
version of the toolbox is displayed.
If no navigation is active, the following
version of the toolbox is displayed.
You can advance to enter the destination
by selecting
Enter destination
entries
Route
selected if navigation is not active.
37
Route
> In the Map Toolbox, select
The route menu is displayed.

Enter/delete stopover.

With this function, you can enter or
delete a stopover.
> In the route menu, select
As described in "Destination input" on
page 20, you can now enter a destination
as a stopover. You can also select from
recent stopovers by selecting
last destinations
. The
and cannot be
Repeat
Note:
The following functions are only
available during active navigation.
.
stopover
Select from
.
Once you've entered the desired stopover,
the new route is calculated.
The entered stopover is indicated on the
map with a red flag.
Delete stopover.
.
Route
> In the route menu, select
.
stopover
The stopover is deleted. The route is
recalculated

TMC on your route

You can view and process TMC messages
that appear on your route.
Note:
The TMC messages that led to route
adjustments are also displayed.
Add
> In the route menu, select
TMC messages that appear during your
route are displayed.
After selecting a message, you can decide,
for example, whether or not you would
Delete
.
TMC on route