Speed Limits - Becker Map Pilot Operating Manual

> Switch Autozoom on
with .
Autozoom
After selecting you can specify
Advanced
how strong the Autozoom action is to be.
POIs on the map
You can select which POI symbols are to
be displayed on the map.
> Select
in the map settings.
POIs on map
> Switch display of the POIs on
with .
Show POIs
After selecting
whether all POI symbols or only a set of
POI symbols selected by you are to be dis-
played on the map.

Speed limits

You can select whether speed limits are
or off
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
> Select
Speed limits
Risk of accident.
The speed limit information in the map
data may be incorrect as a result of short-
term changes (road works, for example).
The traffic situation and the local road
signs take precedence over the navigation
system information.
or off
you can specify
Advanced
in the map settings.
WARNING
SETTINGS
> Switch the speed limits on
with .
Speed limits
After selecting you can specify
Advanced
whether speed limits are only to be dis-
played if the limit is exceeded or always
displayed. You can also set the minimum
speed at which you would like to receive a
warning if the limit is exceeded.
>>>
> EN
or off
48